Contact us at (800) 635-9729


Need Radiology Supplies ?     CLICK HERE

RadiForce RX660 6MP Color LCD Monitor

RadiForce RX660 6MP Color LCD Monitor
A 6 megapixel monitor ideal for viewing a variety of medical images at the same time including CR, DR, CT, MRI, and ultrasound. Featuring a new design and unique EIZO technology, this monitor offers precise medical image viewing as well as ease-of-use.
Description

Details

RadiForce RX660 6MP Color LCD Monitor

Evolve Your Image Reading

As more image modalities become digitalized, radiologists are viewing an increasing amount of information on their screens. EIZO's unique Work-and-Flow technology alleviates the complexity of the imaging workflow with new functions developed with the radiologist in mind. Users can take advantage of Work-and-Flow features with the RadiForce RX660 and bundled RadiCS LE software.

Quick Information Referencing

The Hide-and-Seek function enables users to easily hide the PinP (Picture in Picture) window not currently in use and reopen it as needed by moving the mouse cursor to the edge of the screen. This eliminates the need for an extra monitor while still allowing quick and efficient viewing of reports, patient charts, and other information.

Barrier-Free Workstyle

With the Switch-and-Go function USB switching is done within the monitor. This enables users to use a single keyboard and mouse across two PCs. Users can easily work on either PC by simply moving the mouse cursor across the screens. This enhances work efficiency and creates a cleaner workspace.

Achieve Clarity True to the Source Data

A medical monitor needs to be capable of high brightness in order to meet performance standards. However, in order to achieve high brightness in an LCD panel, the pixel aperture ratio has to be increased. This causes a typically unavoidable decline in sharpness. With EIZO's unique Sharpness Recovery technology, the decrease in sharpness (MTF) is restored . This allows you to display an image safely on the monitor that is true to the original source data, even at high brightness levels.

MTF measures numerically how faithfully the panel transfers detail from the original image data for viewing. When Sharpness Recovery is turned on, in the case of a 2 pixel line pair (spatial frequency of 1.270 cycles/mm) the MTF increases by approximately 51%.

Create the Ideal Environment

The black front bezels are ideal for viewing the screen in dark reading rooms, making it easier to focus on images, while the original white stripe around the sides of the monitor presents a fresh, clean aesthetic.

Save Work Space with Sleek Cabinet Design

Compared to its predecessor, the monitor's width and depth were reduced by 9.5 mm and 56.5 mm respectively. In addition, the size of the power supply was greatly reduced and now comes built into the monitor. This results in a monitor that takes up 23% less space, giving you more room for other tasks. It is also 6 kg lighter than the previous model for ease of installation.

Hassle-Free Multi-Monitor Configuration

The monitor is equipped with DisplayPort 1.2 input and output terminals. Using a single cable connected to the input terminal, the monitor displays 6 megapixel resolution. In addition, using the output terminal allows you to easily configure several monitors in a daisy chain sequence without the hassle of excessive cabling.

Variations

SKU      Model
131002 RX660-BK
131003 RX600-SHAW510 Bundle with AMD FIREPRO X5100 PCle x16 video Card
131004 RX660-SH-NM200 Bundle with NIVIDIA Quadro M2000 video card

Additional Information

Additional Information

Screen technology 6MP 30" Color LCD Monitor
Active screen size (diagonal) ----
Active screen size (H x V) 6MP 30" Color LCD Monitor
Resolution 3280 x 2048 (16:10 aspect ratio)
Pixel pitch 0.1968 x 0.1968 mm
Display Type Color
Grayscale Display ----
Viewing angle 176° / 176°
Contrast ratio 1500:1
Response time 25 ms (on / off)
Sensor ----
Scanning frequency (H;V) 31 - 127 kHz / 22 - 61 Hz Frame synchronous mode: 29.5 - 30.5 Hz, 59 - 61 Hz
Sync formats ----
Housing color Black
Video input signals DVI-D (dual link) x 1, DisplayPort x 2
USB ports 2 upstream, 3 downstream
USB standard USB 2.0
Output terminals DisplayPort x 1 (daisy chain)
Power Requirements AC 100 - 240 V: 50 / 60 Hz
Power management DVI DMPM, DisplayPort 1.2a
Dot clock ----
OSD languages English, German, French, Italian, Japanese, Simplified Chinese, Spanish, Swedish, Traditional Chinese
Dimensions w/o stand (W x H x D) ----
Weight with stand 14.2 kg with out stand 10.1 kg
Mounting standard VESA 100 x 100 mm
Certifications CE (Medical Device Directive), EN60601-1, ANSI/AAMI ES60601-1, CSA C22.2 No. 601-1, IEC60601-1, VCCI-B, FCC-B, CAN ICES-3 (B), RCM, RoHS, China RoHS, WEEE, CCC, EAC FDA 510(k) Clearance - Pending (for General Radiograph
Supplied accessories AC power cord, signal cables (DVI-D - DVI-D [dual link supported], DisplayPort - DisplayPort x 2, short DisplayPort - DisplayPort), USB cable x 2, cable cover, Utility Disk (RadiCS LE, PDF instructions for use, PDF installation manual), instructions for use
Optional accessories Warranty: Five Years
REQUEST QUOTE

Personal Info

  • all numbers no dashes

Company Information

Product Information

* Required Fields