Contact us at (800) 635-9729


Need Radiology Supplies ?     CLICK HERE

CXDI-401C Wireless Digital Radiography System

CXDI-401C Wireless Digital Radiography System
CXDI-401C Wireless Digital Radiography System
Description

Details

CXDI-401C Wireless Digital Radiography System

Designed to expand imaging capabilities, the CXDI-401C DR System was created for full-field imaging and is the largest of the CXDI wireless systems.  The CXDI-401C DR System offers a large imaging area without the need to rotate the detector.

Features

  • High Resolution and High Sensitivity
    With a 125 micron pixel pitch, the CXDI-401C Wireless Digital Radiography System delivers exceptional spatial resolution. The high DQE (detector quantum efficiency) performance of the Cesium Iodide (CsI) scintillator and the LANMIT sensor help reduce the X-ray exposure to the patient.

  • Wireless Range
    The CXDI-401C Wireless Digital Radiography System has a range that can be calibrated for signal strength. Depending upon the room in which the CXDI-401C Wireless Detector is used, the power can be managed and potential interference can be reduced. Should the wireless connection be lost, the unit will automatically attempt to reconnect and to prevent image loss. Acquired images are stored locally in the on-board memory. Once reconnected, the images can be retrieved. Patient demographic data is not transmitted via wireless keeping the images anonymous. An optional wiring unit allows images to be transferred from a panel mounted in a bucky tray to the control computer over hard wire.

  • 5 GHz and 2.4 GHz Data Transfer
    The CXDI-401C Wireless DR Detector runs at 5 GHz and 2.4 GHz on an 802.11n network that helps increase signal clarity - resulting in fast data transfer speed.

  • Quick Results
    An on-screen preview image is available approximately 4-6 seconds after exposure. An additional monitor (not included) can be added for the immediate viewing of high-resolution images in the emergency department or radiography suite.

  • CXDI-401C Wireless Digital Radiography System

    Designed to expand imaging capabilities, the CXDI-401C DR System was created for full-field imaging and is the largest of the CXDI wireless systems.  The CXDI-401C DR System offers a large imaging area without the need to rotate the detector.

    Features

    • High Resolution and High Sensitivity
      With a 125 micron pixel pitch, the CXDI-401C Wireless Digital Radiography System delivers exceptional spatial resolution. The high DQE (detector quantum efficiency) performance of the Cesium Iodide (CsI) scintillator and the LANMIT sensor help reduce the X-ray exposure to the patient.

    • Wireless Range
      The CXDI-401C Wireless Digital Radiography System has a range that can be calibrated for signal strength. Depending upon the room in which the CXDI-401C Wireless Detector is used, the power can be managed and potential interference can be reduced. Should the wireless connection be lost, the unit will automatically attempt to reconnect and to prevent image loss. Acquired images are stored locally in the on-board memory. Once reconnected, the images can be retrieved. Patient demographic data is not transmitted via wireless keeping the images anonymous. An optional wiring unit allows images to be transferred from a panel mounted in a bucky tray to the control computer over hard wire.

    • 5 GHz and 2.4 GHz Data Transfer
      The CXDI-401C Wireless DR Detector runs at 5 GHz and 2.4 GHz on an 802.11n network that helps increase signal clarity - resulting in fast data transfer speed.

    • Quick Results
      An on-screen preview image is available approximately 4-6 seconds after exposure. An additional monitor (not included) can be added for the immediate viewing of high-resolution images in the emergency department or radiography suite.

    • Battery
      The battery lasts approximately 140 images and takes less than 3 hours to charge. The battery charger (sold separately) can charge up to 2 batteries at a time so a fresh battery can be continuously available. The control console includes a battery indicator for image count and power level monitoring. Additional batteries (sold separately) are also available.

    • Portable and Flexible
      Each individual CXDI-401C Wireless Digital Radiography System can be used in multiple X-ray rooms. Up to 10 detectors can be registered for use in any room. A check-in unit in each room identifies the particular detector being used there.

    • CXDI Control Software NE
      The CXDI-401C Wireless Digital Radiography System uses the Canon CXDI Control Software NE. The intuitive operation of this software gives a wide range of selections directly from the main menu and yet images can be taken within three touches. The CXDI Control Software NE also has advanced image processing that shows the subtle details of trabecular bone structure and soft tissue in the same image.

    Disclaimers

    Prices and specifications subject to change withoug notice.  Actual prices are determined by individual dealers and may vary.

Additional Information

Additional Information

More Information

Detector

 

Method

Flat Panel Detector, Scintillator & Amorphous Silicon (a-Si)

 

Scintillator

Csl (Csl: TI)

 

Sensor

LANMIT (Large Area New-MIS sensor and TFT)

 

Pixel Pitch

125 Microns

 

Pixels

3,320 x 3,408 (11.3 Megapixels)

 

Imaging Area

16.8 x 16.3 in (43 x 42 cm)

 

Standard Components

Sensor Unit, Power Box, Status Indicator, X-ray Interface Cable

 

Image Acquisition and Processing

 

Image Processing

Standard Advanced Multi-Frequency Processing

 

A/D

14-bit

 

Grayscale

4,096 Grayscale (12-bit)

 

Preview Image

3 Seconds After X-ray Exposure

 

Full Image Display

5 Seconds After X-ray Exposure

 

Data Output and Network Connection

 

Network

Ethernet 10/100/1000 Base T, RJ45 Standard, Wireless Optional

 

DICOM

DICOM 3.0 Compatible, Print Management Service Class (SCU), Storage Service Class (SCU), and Others

 

Electrical and Environmental

 

Voltage

AC 100-240V 50/60Hz

 

Operating Environment

Sensor Unit: 41-95°F (5-35°C), Humidity 30-80% RH (non-condensing)

 

Physical Characteristics

 

Dimensions (W x L x H)

21.7 x 21.7 x 2.3 in (550 x 550 x 59 mm)

 

Weight

28 lbs (12.7 kg)

 

 

 

Specifications are subject to change without notice.

 

REQUEST QUOTE

Personal Info

  • all numbers no dashes

Company Information

Product Information

* Required Fields